This gallery shows the eight industrial robot applications Sheeta Robotics designs, programs and maintains: machine tending, palletizing, welding, pick and place, vision inspection, dispensing, additive manufacturing and deburring. Filter by process to see the cell type you are planning, and click any image to view it larger.يعرض هذا المعرض التطبيقات الصناعية الثمانية التي تصممها شيتا روبوتيكس وتبرمجها وتصونها: خدمة الماكينات، والتستيف، واللحام، والالتقاط والوضع، وفحص الرؤية، والتوزيع والرش، والتصنيع الإضافي، وإزالة الحواف. رشّح حسب العملية لترى نوع الخلية التي تخطط لها، واضغط أي صورة لعرضها بحجم أكبر.
No projects in this category yet — check back soon, or ask us about it directly.لا توجد مشاريع في هذا القسم بعد — عد قريبًا، أو اسألنا عنه مباشرة.
The images above are illustrative. Below is what Sheeta Robotics actually delivers in each of these eight processes.الصور بالأعلى توضيحية. وبالأسفل ما تنفّذه شيتا روبوتيكس فعليًا في كل عملية من هذه العمليات الثماني.
Machine tending means loading and unloading a CNC machine or press with a robot, interlocked with the machine's door, chuck and cycle signals so nothing moves at the wrong moment. Palletizing is the end-of-line job: stacking cartons, sacks or trays in a layer pattern with a clamp or vacuum head, usually with pallet and slip-sheet handling included.خدمة الماكينات تعني تحميل وتفريغ ماكينة CNC أو مكبس بواسطة روبوت، مع تشابك آمن مع باب الماكينة وظرفها وإشارات دورتها بحيث لا يتحرك شيء في اللحظة الخطأ. أما التستيف فهو عمل نهاية الخط: رصّ الكراتين أو الأكياس أو الصواني بنمط طبقات باستخدام قابض أو رأس تفريغ، وعادةً مع مناولة البالتات والفواصل الورقية.
Arc and spot welding cells need fixture design as much as robot programming — the weld is only as repeatable as the part is located. Dispensing covers adhesive, sealant and coating paths where flow is synchronised to robot speed. Deburring and finishing use compliant tooling or force control so the robot follows the real surface rather than the nominal CAD path.خلايا اللحام القوسي والنقطي تحتاج تصميم فكسشر بقدر ما تحتاج برمجة الروبوت — فدقة تكرار اللحام لا تتجاوز دقة تثبيت القطعة. والتوزيع يشمل مسارات المواد اللاصقة والعوازل والدهانات حيث يُزامَن التدفق مع سرعة الروبوت. أما إزالة الحواف والتشطيب فتستخدم أدوات مرنة أو تحكمًا في القوة ليتتبّع الروبوت السطح الحقيقي بدلًا من مسار التصميم النظري.